How to knit a fishing net with your own hands? Step-by-step instruction, diagram

Fishing was an affordable trade back in ancient times.time. Now it does not lose its popularity. It is a hobby for a lot of people, as well as a wonderful kind of recreation. Planning a day off, it will be a good decision to spend it in nature. For fishing apply a variety of gear. The network is one of the first devices that can bring a big catch. Therefore, wanting to combine your favorite hobby and rest in nature, you should choose this tackle. You can create it yourself.

How to knit a fishing net, will help to understandexpert advice, as well as the scheme of this process. In this there is nothing complicated. You need to buy a nylon thread, and all tools and devices can be made independently. Weaving of networks is carried out according to different schemes. For a beginner, simple circuits are more suitable in this matter. They should be considered before starting work.

Materials

To understand how to start a knit fishing net,it is necessary to consider the materials involved in the process. First of all you will need the threads. Their fishermen are called deli. Modern networks weave from synthetic materials (nylon, kapron, etc.). At the same time, the dens are more durable, do not rot and do not collapse for a long time. Experienced fishermen argue that networks of synthetic materials are more catchy.

In order for the net to hold a certain shape, it is weaved on special ropes, which are called planting laces. It can be a wire.

You also need to select the material for the weights andfloats. They should be smooth, better rounded. For floats suitable foam plastic, birch bark or wood. That the material does not break down, it is covered with appropriate paint.

The sinker is made of baked clay or trimming pipes. To sharp edges do not tear the net, the sinker is processed with a file and sandpaper.

Tools

Studying how to knit a fishing net shouldremove the attention of the tool. First of all, you need a shuttle. This is a kind of needle, with which the network will be knit. It is also necessary to prepare a bar or ruler. It is also called a template. This is a plate with smooth edges. It determines the size of the cells.

A shuttle can be bought at the store or manufactured atdesire independently. To do this, you need to prepare a sheet of plastic or plywood. The workpiece is cut out according to a certain pattern. Its edges must be rubbed with sandpaper. It is easier to beat out the middle with a chisel.

The material must be sufficiently rigid. This requires plastic or plywood not thinner than 2-3 mm. The width of the shuttle is approximately 3 cm, and the length is about 25 cm. If the bar (template) by which the width of the cell is determined is small, then the shuttle width should be even smaller.

Beginning of work

After creating the tool and purchasing the necessary materials, it is necessary to consider the technique of how to knit a fishing net. A step-by-step instruction will help to understand all the subtleties of this process.

First, you need to wind a thread or fishing line on the shuttle. To do this, several turns must be applied to one side in the center of the tool, and then to the other. In a place convenient for work, you should tie a thick rope in the form of a ring. It is more convenient to use wire for this purpose.

To work it is necessary sitting, t. To. It will borrow or occupy a lot of time. A loop is stretched through the ring and a loop about 5 cm long is made. A bar is applied to the node formed from below.

The shuttle is brought down under the template, and the thread is withdrawn through the ring. She is pulled and clamped with her finger. Tie the knot with a knot.

Node creation scheme

This creates the first cell of the future network. But you should continue the action. The technique of creating a node should be considered in more detail in order to understand how to learn how to knit a fishing net. A step-by-step instruction will help you understand this method.

The thread from the ring passing under the template extends from above it to the shuttle. Further, parallel to the previous deli, a line is also stretched. All three threads are clamped with the fingers of the left hand.

Then the shuttle is stretched between the fishing line,tied to a ring, and two other threads. Between the fingers and the hook there must be enough material to form a gap. If you push the shuttle into it, you get a knot. When the entire loop is on top of the template, the knot will tighten.

If you repeat this operation, you will get the second node. It is tightened for greater reliability.

Ring strapping scheme

After creating the first cell and node,tie the whole ring. Experienced anglers will tell in detail how to knit a fishing net. The scheme of this process corresponds to the procedure discussed above. The thread is laid over the template again. Then it passes from below it and passes through the ring.

Then the thread is brought to the finger and pressed. Then make 2 knots. If you want to make a network with cells 50x50 mm with their total number of 20 pieces, on the ring of wire there will be 21 loop.

All nodes must be made at the same distance. After 21 loops have been typed (or other required quantity), the threads are carefully removed from the template. The next row is matched.

Network Weaving

Interested in how to knit fishing nets byhands, it is necessary to consider the subsequent weaving. From the wire ring it is not removed, until about 10 rows are created. In this case, you will get a network with 5 cells in length.

If you stretch this product, you get a structure about 2 m in size. When assembling (planting), the network will decrease. The reduction will be about 1/3. In this case, the network will be 1.3-1.5 m in length.

This work is laborious, requiring a sufficient amount of time. To shorten the process, you can try to make nodes by another technology.

Complex node schema

The technology presented above makes it possible to understand how to knit fishing nets by oneself. The schematics of the nodes may be somewhat different. Some of them are knit easily, but it takes a long time.

To make the process go faster, it is necessary to assimilatetechnology of weaving complex knots. After the thread is laid on the template and pressed, it is lowered down. Next, the line is captured with the little finger of the left hand. It is then stretched between the template and the finger.

Next, you should pay attention to the shuttle. The index finger of the right hand is pressed against it. Movement to the thread is captured and left on the shuttle. Then the captured line is pulled on itself. With your right hand, move your finger down and at the same time from yourself.

The thread crosses. The right hand with the shuttle is carried to the cell. The index finger moves away from it. The end of the shuttle is passed to the next cell. The thread folds for him. The shuttle moves further, and the string is stretched.

Tightening of a complex knot

Studying how to properly knit fishing nets,it is necessary to tighten the complex knot. The template moves close to the captured cell. The left hand clamps the place where the knot will be tightened afterwards. Now the little finger is discarded with the little finger. Then the knot is tightened.

First, this process can take a long time. But the hands will gradually get used to, and the network will be knit with almost automatic movements. You can even watch TV and do the work.

Repair of delays

When studying technology, how to knit a fishingnetwork, you should pay attention to the repair of delhi. Sometimes it is required to tie up pieces damaged during fishing. If you want to reduce the number, then at subsequent levels, the number of cells is reduced. To increase the width of the divisions, one shuttle is passed through one window 2 times.

To cut the damaged cells, at the edgenote this area. Next, the damaged segments are taken from the site. At the same time, the 2 threads that come out of it are cut off at once. So you can remove a whole row. The cells are also cut diagonally.

If necessary, 2 pieces of network can be connected andmake a few old ones one new. For this, pieces of nets are hung over the last segments on a nail. The combined edges of two pieces are stretched. The shuttle is passed 2 times in each pair of windows. Every 5-7 cells become a node.

You can tie the thread alternately to segmentsone and the other network. This is a more reliable method. In this case, the movements of the shuttle are carried out in the same way as when weaving a common deli. Thread should be the same thickness as in both pieces of old networks.

To repair sooner or later it will be required. In this process, too, there are no great difficulties.

Having become familiar with technology, how to knitfishing net, you can independently create a catch gear. Over time, the process of weaving will take quite a bit of time. Therefore, to create deli alone will not be very difficult. When using networks, the fisherman does not have to participate all the time in the fishing process. After installing the gear, you can enjoy rest on the nature, and return home with a big catch.

Owning the technology of knitting, you can not only weave them, but also repair them if necessary. This greatly extends the life of the networks.

Good catch!

</ p>>