How to tie the tracks with knitting needles: a step-by-step instruction with a description

Keep your feet warm. And without warm socks-footprints can not do. How to tie the tracks with knitting needles? A step-by-step instruction will help us in this.

Threads and needles

For each piece of clothing is best to choose a separate material. And with knitting. Yarn for socks or tracks should be first and foremost durable. To remove the foot of a thread, you can usethe same as for the main part of the trace, only to strengthen them with an additional thread. Which is better to choose? Of course, kapron. This yarn is thin, but strong; Soft, but well-shaped. Knitting needles for knitting can be taken as standard. The formula is as follows: the filament is two-fold, slightly scraped, equal to the thickness of the spoke. And you can take the knitting needles a little thinner than for knitting blouses or hats. So, we figured out the necessary materials and tools. Let's take a step-by-step instruction on how to tie the tracks with knitting needles.

Foot-toe socks

Knitted socks or stitches should be warm,to warm your feet is their direct purpose. Someone inserts them into boots or boots, and someone uses them as home shoes. There is an option, when the tracks or socks are knitted with lace, from thin threads. Such a product can be safely worn with open shoes in the summer.

The easiest way

There are several variations toHow to tie the tracks with knitting needles. The step-by-step instruction is signed in several rows. So:

1. Type 7 knitting needles on the knitting needles.
2. Tie a strip of 7 eyelets on the front or hosiery to the length of the foot + 2 centimeters + height of the heel.
3. At the edge of the strip, type the required number of loops so that the canvas is flat. The height of the heel remains free.
4. Loops along the edge of the strip-trace, 1 reduction, 7 loops (middle), 1 reduction, loops along the edge of the strip-trace. Decrements must be carried out in each row - both the front and the back. Also at the end of each row for double loop it is necessary to grasp the hinges along the edge of the tail left for the heel. In the process of knitting, the heel will be formed, and it will not need to be sewn.
5. When the height of the shifter becomes sufficient, close the loop.

Knit can be any smooth, pattern, jacquard. But best of all, such footprints sit on the leg, if they are connected with an ordinary elastic band 1x1. This was the first way, how to tie men's tracks with knitting needles. The step-by-step instruction on this method of operation is the same for all sizes, it is universal.

It's fast

There are situations in life when you need to do something very quickly. TOHow to tie two of the spokes together? A step-by-step instruction will help to make such a job very quickly.

1. To type on spokes such quantity of loops that the length of the typed edge was hardly less than length of a foot.
2. In the first row, loops divided into two spokes - the first to tie, the second to remove, leaving the thread before the loop removed. So fasten all the loops.
3. In the opposite row, those loops that were removed are sewn, and the knitted ones are removed in the previous row, leaving a working thread between the two loops.

Knitting in this way allows you to immediately get a double cloth. Knitting off knitting will look like this:

To keep the tracks better, the last fewThe rows need to be tied with an elastic band 1x1 or add a string-elastic. For those who are already more or less versed in the technique of knitting, you can perform such a reduction with a decrease in the toe, then the product will get a more correct shape. We examined one more option, how to tie the tracks with knitting needles. Step-by-step instruction and job description will help make the thing quality and practical. By the way, for double crochet tracking without decreasing the toe, it is best to take a sufficiently elastic yarn or at least add a nylon thread that will provide the product with an anatomical fit.

Traditions to help

There is another interesting way how to tie the tracks with knitting needles. Step-by-step instruction:

1. For four spokes, dial the required number of loops (push off from the length of the ankle).
2. Bind 5-7 rows of elastic 1x1.
3. Then knit a heel on three spokes: remove the loop, the next tie, reverse the row, knit with purl all the loops. In this way, continue knitting until the required height of the heel is typed.
4. Then divide the heel into three parts, tie the middle one, at the end of each row, grabbing the first loops of the left side pieces. So the heel will be formed.
5. Type the hinges along the edge of the heel, if necessary, making the cuts on the toe.
6. Knit a foot any viscous - an elastic band, braids, a smooth surface - on length of a foot.
7. To make out a sock, tying on the sides three hinges together face.
8. Strip the thread, stretch it through the remaining loops, tighten and put it on the wrong side and fasten it.

Simple and unusual

Many needlewomen are thinking about howtie knitting with knitting needles. A step-by-step instruction describing the work will help to connect unusual home shoes. The model knits on four spokes. For example, on knitting needles No. 3 for size 37-38, 60 loops should be scored, spreading them evenly 15 on each spoke. Knitting in a circle. The first 6-7 rows should be tied with an elastic band 1x1. Then the first three knitting needles are left without work, and knitting continues on the fourth spoke. It creates a "tongue" facial smoothness for 40-45 rows, depending on the size of the foot. Then knitting continues as follows:

1. 15 sock loops on the fourth spoke.
2. The required number of loops (40-45) along the edge of the tongue + 15 loops of the first knitting needle.
3. 15 loops of the second spoke.
4. 15 loops of the third spoke + 40-45 loops of the "tongue".

On four-spoke spokes in a circle, knit with an elastic band 1x110-12 rows (depending on the size of the foot). The next step will be the etching of the trace. On the third spoke, on 15 loops, you should knit with a stocking knit so that the last loop of each row is tied along with the corresponding loop along the edge of the side. If you tie these two loops together, then the trace does not have to be sewn, it is immediately formed. The trace and the loops of the fourth knitting needle are also tied together, while simultaneously closing the knitting. Tail the thread away on the wrong side.

Footprints "Crosswise"

Consider one more step-by-step instruction, liketie knitting with knitting needles. A photo of this unusual product is presented below. So, dial 25 loops. Knitting is done by stocking or facial knitting. By the way, you can immediately decorate the footprints, then you need to take the yarn of the primary color and an additional 1 - 3 colors. So, type the main yarn 25 loops on the spokes number 3. Tie any two sides of a row. Then, in another color, associate 2 rows on 20 loops. Again 2 rows on 25 loops with the main color. The next 2 rows are colored on 15 loops. This is the whole job: 2 rows on 25 loops of the same color, then 2 rows of shortened colored on 20 loops, 2 rows of the main color on 25 loops, and again shortened colored 2 rows on 15 loops. This is repeated until a canvas of suitable size is obtained so that, sewing the back seam and the seam of the sole, get a trace.

Simple truths

Warm and cozy footprints can be connected by manyways that are tried by skilled workers. You can come up with something yourself, because knitting is a grateful occupation, giving scope for creativity, allowing you to redo the mistakes many times. Beginner knitter-knitters will be interesting to learn and tie knitting needles. Step-by-step instruction and photos of similar works will always help to choose the suitable model, to understand the principle of work. Threads are best to take synthetic or semi-synthetic so that they are toe, not too slippery, but at the same time warm and some. The sock of a trace is formed by adding or decreasing the loops, depending on which side of the knitting is started. In this, perhaps, is all the complexity in working with the tracks. The heel and sole can be formed by stitching the finished product. For comfort, you can decorate the decor with various decor - tie flowers, leaves, sew buttons or beads. Home shoes are useful for all home - children, mom with dad, grandmother and grandfather. Yes, and as a small gift, she will always be pleased.

</ p>>