How to make a salute with your own hands at home

What is fireworks? For many, such pyrotechnics is associated primarily with the holiday. This explains the high popularity of such devices. Besides this, fireworks are very beautiful and unique. Fireworks allow you to make any holiday more light and colorful. That's why many are wondering how to make a salute in the home. After all, in shops such pyrotechnics costs a lot of money. A product collected by their own hands will cost less. The main thing is to observe the safety rules and do not forget that the compounds in the fireworks shell are explosive. If you misuse these products, you can get injured. So, how to make high-quality salute in the home without spending extra money at the same time.

What will you need?

Since many people want to make fireworks at home, it's worth pointing out the components that are needed for this. You will need:

Magnesium or a shaving of magnesium.
Matches - several boxes.
Metal tube.
Gypsum.
Foil.
Wick.
Knife.

Where to begin

So, how to make fireworks with your own hands. First of all, it is necessary to prepare a mixture that will not only explode, but also glow. It is worth noting that this method of manufacturing is considered the most common, since at home, making a salute from other components is much more difficult. To create pyrotechnics, you need any object that has a magnesium coating. That's it and you need to carefully remove it. This can be done with a conventional knife or with a special device.

Of course, it's better to get ready-made shavingsmagnesium. But if there is no such possibility, then you will have to prepare it yourself. The chips should be made very shallow. Otherwise, the effect will be weak. If very large shavings are obtained, then it should be crushed thoroughly.

Blasting preparation

Since making fireworks from pure magnesium is notit turns out, we need matches. The contents of several boxes should be cleaned of sulfur. Remove the substance from matches carefully. At the same time, you need to make sure that no wood chips fall into the sulfur. The resulting mass should be crushed thoroughly. After this, it is necessary to take a container of large dimensions and combine in it crushed sulfur and magnesium. The components must be mixed. As a result, a homogeneous mass should be obtained.

Work with the composition should be neat, becauseits components are easily ignited. Since it is easy to make a salute at home, it is necessary to remember the rules of safety. Violation of any of them is fraught with consequences.

How to make a sleeve

To make the sleeve, you need to find a piecemetal tube with holes, located at the top and bottom. It is better not to use paper cartridges. The lower hole in the piece of pipe should be sealed. In this case, it is better to use gypsum. This substance is just an ideal stopper. Through gypsum, even the liquid does not penetrate into the sleeve. Do this cork is worth it in advance. Otherwise, you have to wait until the gypsum is completely dry. That's all the cartridge for the pyrotechnic product is ready.

How to make fireworks at home

In the prepared sleeve it is necessary to pour neatlyA mixture of sawdust of magnesium and sulfur from matches. Do not forget about safety. It should also be noted that the composition should occupy no more than ½ of the total volume of the finished cartridge.

After this, it is necessary to wrap the mixture filled withmagnesium and sulfur tube with foil. It is better to use wide sheets of this material. Fireworks should be wrapped with foil several times. This will achieve a better effect. That's all. It remains to stick a wick in the top hole. The usual thread is suitable for this part. Since it is necessary to make fireworks safer, the wick should be made more authentic.

Finally

Now you know how to make fireworks yourhands. However, when working with flammable mixtures, do not forget about safety. After all, the manufacture of any pyrotechnic product in the home is dangerous and represents a very risky occupation.

Use of the finished product indoors is strictly prohibited. To ignite a wick is on the street and only in a place where there are no trees nearby, as well as objects that can quickly catch fire.

</ p>>