Laser level: how to use? Laser level for the house. Instructions

Minor repairs or construction is difficultPresent without tools and tools that make work much easier. People have learned to produce the first levels 200 years ago. Of course, they were primitive. But now in our time have invented a high-precision laser level. How to use this device to get accurate information? We will try to learn all the nuances that will help you with the construction.

Preparing the tool

Before using the device, carefullyread the instruction, because in the work of each level there are some subtleties. Make sure that the unit is assembled, the batteries or the battery are installed and have sufficient charge. Try turning it on with the button on the case, turning the beam away from you. If the laser appears and creates a projection, you can proceed with the subsequent manipulation of the instrument.

Set the Level

Depending on the types of work that you wantThere are several options for how to set the laser level. How to use and how to position the device correctly? We will have to experiment to achieve the correct and accurate projection. Models can be mounted on a tripod, on the floor, on the ceiling, on the wall. Please note, if you intend to use the level on the street, be sure to read the instructions and make sure that your device is protected from external influences: moisture, frost, sunlight. An important range is also important, in which the level will work fine.

For example, the laser level "Bosch" hasThe housing is well protected from overheating and freezing in the street. Modern levels are equipped with automatic calibration, that is, the device will show if you have unevenly installed it. But experts recommend testing the installation in addition. For this procedure, the simplest level (for example, bubble) is suitable. This is necessary to make sure that your device is correctly leveled, otherwise you will not be able to achieve high accuracy.

Set up the device

Each model of the device is accompanied by a clearinstructions for customization, but the general principles of working with the level are similar for the entire line of laser devices. If you have a prism instrument, you can choose the beam projected onto the surface: horizontal, vertical, both at once. And also choose the function of turning off and turning on the laser points or plumb points (if there is one in the device). In some rotary-type devices, you can select the rotation function of the laser beam or the desired alignment angle.

When using the level, determine whichYou will perform the work, and starting from this, enable the necessary mode. The laser level for the house can, for example, be used to check the verticality of the doorway. In this case, turn on only the corresponding axis, and turn off the others. This will provide you with the highest accuracy and will save on power consumption, that is, your device will work offline for much longer.

Detector: how to work with it

If you need to perform work on verificationhorizontality of the floor and set the accuracy of the formwork, you can not do without the detector of laser beams. For example, the laser level "Bosch" is equipped with this small device. It allows you to detect rays that are invisible to the naked eye, which project the leveling. This function is especially useful if the instrument is installed at a great distance from the object. Usually a special pulse mode is set for the detector function in the level. Before starting work, make sure that it is switched on.

Exactly at the target

Almost all devices are equipped with specialaccessory. It resembles a target (a plastic plate on which marking is applied). This is a very convenient device that helps to make the most accurate marks even at a distance of 100 meters. Imagine that you "aim" the beam in the right plane, for sure it can only be a sniper. Anyone can "get" on the target on the plate. Some models are equipped with an optical sight, which makes your work even easier.

Be careful, laser!

If sometools there is a risk of harm to health. This includes the laser level. How to use this device correctly? Before you start, be sure to wear special safety glasses that are attached to the level. If the laser hits the eye, the retina is destroyed, and a burn is possible. Observe the safety rules.

Let's move on to practice

To understand how to apply the laser level 360 or any other analogue of the level, we will give an example of the most frequent work during construction and repair:

• Aligning the walls. To make sure of the evenness of the floor, walls, ceiling, it is enough to direct the laser beam along the surface. For such work, additional control marks will be required, which need to be placed in several places on the floor. Look carefully at how much the surface is uneven at each control point, and you will immediately understand how much material you will need to align the defects.
• Masonry tiles. For these jobs, choose a device that has the function of projecting cross laser lines horizontally and vertically. The resulting crosshair of beams is directed to the center of future butt welds of the tile. Orienting on them, it is very easy to perfectly lay out the tile perfectly. Such a useful feature is equipped with a laser level Ada, besides, it is distinguished by its democratic price, in comparison with analogues.
• Pasting wallpaper. It would seem that the matter is not complicated, but it is much more convenient to work with a level. For example, a laser beam that is thrown on a wall will become an accurate reference point, in order to align the sheets when pasting. But with the help of a vertical projection, you can accurately paste a curb.
• Installation of furniture. Even if you have flat walls in your apartment, which is rare, your interior can be damaged by crookedly suspended cabinets and shelves. For example, a level that can build circular projections, immediately presents a complete picture of how to properly and exactly hang all the accessories. Horizontal projection will help when fastening curtains for curtains. The leveler saves your time considerably, no complicated calculations are necessary.
• Redevelopment. With the laser level, such work has become much easier. After all, to determine the exact and equal location of walls and partitions, you need to arrange the level so that the beam that it projects onto the floor, ceiling, walls, became a mark for the future wall.

How to "build" inclined planes

If you want to fantasize and createreally unique interior design, you will definitely need a laser level-level. The modern device is equipped with the function of disabling automatic equalization. That is, you yourself can project any line. It is enough to put the device at the right angle on a tripod or to hang it and you can plan future geometric solutions in the interior.

Measurement with a level

So, you have a laser level. How to use this device to make accurate measurements at home? Of course, the device itself is not designed to measure the height of the ceiling or the distance between the planes. But if used correctly, you will be able to accurately carry out such calculations. For example, you want to accurately measure the height of the ceiling to a centimeter, if your walls are not strictly vertical. Project a plumb line with a level and use a ruler to measure the distance from the point on the ceiling and on the floor. To carry out such work, your device must have a laser plummet function.

How much does the device cost

In fact, the spread of prices for this deviceis large enough. The amount depends on both the built-in functions and the manufacturer. If you intend to use the device at home, you will not need a complex industrial tool. It is enough to have a level that creates a projection from 5 to 20 meters, capable of building them in two planes: horizontal and vertical. It is important that the tool is self-leveling and has the function to disable calibration. Laser level, the price of which is from 1200 rubles. up to 7,000 rubles, will cope with all the above tasks.

When choosing a level, pay attention to the certification of the goods. If he does not have documents confirming his quality and safety, it is better to refrain from such a purchase.

</ p>>