Many novice anglers,
For the first time after seeing feeder troughs on the shelves,begin to be actively interested in what they are for. This specialized tackle, in addition to its main function of delivering the feed mixture directly to the fishing site, also performs the role of the sinker. It at the expense of its weight allows you to throw leashes with hooks for a sufficiently long distance and at the same time keeps the hook in place, where at this time the fish feed. All feeder feeders differ from each other primarily in weight, shape and material of manufacture. Sometimes this rig is silicone or metal. The frame can be any - in the form of a grid or sheet with small apertures. It is impossible to say which of them is better, because they are strictly specialized under certain conditions of catching.
Plastic feeder troughs are very useful whenFishing at pronounced differences of depth. This affects when it is necessary to pull out the subject under consideration from the thickets of aquatic vegetation with force. In such difficult conditions, after a regular cut, an empty silicone feeder (due to its low weight) will soar in the water column rather than sink to the bottom. Therefore, it is easier to carry it through a complex area.
Feeder feeders are also divided into two types: open and closed. This is due primarily to various feeding methods. On standing water, open-type feeding troughs are used more often. The method of casting is as follows: after the fall of the feeder, a short sharp jerk follows, and all the food is on the bottom. On the current, however, only a closed-type tackle is used. It is much more convenient and practical. And the more pronounced the flow, the holes in the trough are smaller. Through them the lure is gradually washed away. At the same time, a fragrant trail that attracts hungry fish is carried along the stream.
There are separate feeding troughs for feeder fishing,made for darnish. But they are used very rarely. The thing is that the price for them is far from being affordable. Most often use the usual tackle, but add the feed sponge in the feed mixture. This gives an excellent result and noticeably activates the number of bites.
When choosing a particular model of the feederit is necessary to take into account that each feeder rod is designed for a certain weight. And exceed it strictly is not recommended. All the data can be asked from the seller-consultant or find the appropriate note on the rod itself. In order not to be mistaken with the weight of the feeder, it must be filled with a mixture, and then weighed. If the weight will exceed the permissible parameters, then it is fraught with constant breakage of the line and loss of tackle, which, incidentally, is not cheap.
Many experienced anglers use self-madefeeder feeders. They are much cheaper and in principle work just as well as factory ones. If you take into account that for each type of pond you need your kinds of feeders, and one or two here can not do, making this gear with your own hands becomes more profitable doubly. Moreover, the bottom relief is usually inhomogeneous, and gear losses, alas, are unavoidable.
</ p>>
