A simple pattern: a dress with a skirt is the sun - the perfect outfit for the summer

Summer - this is the time of the year when the mosttime to replenish your wardrobe with airy bright outfits, which will perfectly emphasize all the dignity and at the same time will be practically weightless, so as not to impede movements on a hot day.

The ideal option, of course, will be a dress: no belt at the waist with a lock or buttons, like on a skirt, or a tight figure of trousers, in which it is terribly hot, but only a lightweight body falling off on the body, allowing the skin to breathe.

The hit of the season at the moment is a dress with a sun-flared skirt. It is about how to sew this model, and we will go further.

Where to start sewing?

Experienced masters will agree that it is correctthe selected material is already half the success. From the quality and texture of the canvas depends both the planting, and the complexity of the processing, and, naturally, the appearance of the product as a whole. To sew a dress with a skirt, the sun is best of flying and flowing fabric, which does not fray and lays beautiful tails. This can be crepe-chiffon, knitwear micromachine, staple, chintz, cambric. Today, stores offer a huge selection of canvases, so there is something to choose from. As for the coloring, then it is already necessary to rely on personal preferences. The only thing to remember is that ladies with lush forms are more suitable for a fabric with a fine print without horizontal stripes.

Material selection

The eternal question: how much tissue do you need to buy to put a pattern on it? A dress with a sun-skirt is a costly product in terms of material consumption. And to calculate it is not difficult. Four lengths of the skirt + the value of the measurement of the waist circumference, in order to cut a circle of the desired length, to the bottom of the article and one length from the shoulder and just below the waist for the top.

Here it is necessary to take into account the width of the roll. In most cases, it is 140 cm, which is quite enough for a long, and for a short dress. In both cases, the fabric is typed in the same way. If the skirt is less than 70 cm in length, then it will be enough 2 lengths of the bottom + 1/3 of the waist circumference. In this case, two semicircles will be placed one below the other.

Choice of accessories

When the required quantity of material is counted andchosen the type of cloth and coloring, it's time to think about the hardware. First of all you will need a thread in the tone of the fabric. If the canvas does not stretch, then it will be necessary to buy a secret zipper with a length of 60 cm. If it is planned to make a silhouette not fitted, but on an elastic band, then, of course, you need a piece around the waist. For decorative design, you can take a couple of beautiful buttons and with a cut out a droplet on the back or chest.

Building a template for the skirt

Another important question: how to build a pattern? Dress with a skirt, the sun is made of four parts: the front and back of the top and two skirts of the skirt. To build the templates of these elements of the product, you need to measure the chest girth, waistline, chest height, back width, backrest height and transfer from shoulder to waist and width of tuck groove solution. It is very easy to build a skirt with your own hands. On one edge of the material lay the length of the skirt + allowance for processing about 2 cm, then 1/3 of the waist circumference and again the length + allowance. Next, on the middle segment, you need to determine the line of the cutout for the waist. To do this, find the middle and, focusing on it, draw a semicircle with a radius of 1/6 the value of the measurement of "waist circumference". After this line, the length of the skirt + allowances for the processing of the bottom is laid on the canvas and all the marks are joined in a semicircle. The second panel is cut out similarly. If you need a long dress with a sun skirt, then simply increase the length of the panels of the bottom of the product. The construction can be made directly on the fabric, without using paper patterns.

Building a template for the top

How is the template stamped? What difficulties does the pattern have? Dress with a skirt-the sun - one of the simplest products. And the upper part of it is constructed as simply as the bottom. For this part of the dress you will need a paper template, so you will need several A4 sheets. They are joined so that you can draw a rectangle with sides equal to the length from the shoulder and to the waist in the front and the value of the chest girth. Immediately determine the line of the chest in accordance with the height of the chest. On one side, half the width of the backrest is marked on it. On the opposite side - half of the solution tuck. Then determine the area of ​​the armhole, which is equal to ¼ of the chest half + 2 cm. Then, from the upper corners of the drawing, mark the throat area and the shoulder seams, which are lowered by 1.5 cm to the edge. On the front half of the mark of the groove solution, a perpendicular is lifted and a tuck is drawn along the shoulder line (retreat a few centimeters, put the mark of the guard and fall to the starting point, and the shoulder seam should be extended by the same amount of centimeters. If this is a dress for a child, then you do not need a dart at all.This will be the simplest pattern.The dress with a skirt-sun can be sewn by constructing the bottom of the product straight on but the fabric, and the template of the top made on the T-shirt of a child.

Product assembly and processing sequence

When all the elements of the cut are ready, you can proceedto sewing. First, close all the darts of the shelves, then connect the shoulder seams. To make the product comfortable to wear, it is made with a zipper either on the side or on the back. In the latter version, the details of the backrest and the back of the skirt will need to be cut in half. The top and bottom are connected in series: first, the top and skirt are sewn together, and then they are joined along the waist line. The skirt-sun is sewn by the hands very simply: join lateral seams, and in a back cut insert a zipper.

It is often enough to put a rubber band in the thong joint. And if you make the top broad enough (it does not spoil the look, if you take a flowing, lightweight cloth into the work), then lightning will not be needed.

</ p>>