What can be done from the remains of wallpaper? Interesting ideas for home creativity

Each person seeks to create in his homecomfortable atmosphere for rest, work and creativity. Often after the repair remain wallpaper and paint. What to do with it? Throw away it is a pity, but it is impossible to use it for its intended purpose. So, what can be done from the remains of wallpaper?

New life for old furniture

What can be done from the remains of wallpaper,minimum of means and time? Everyone is able to update old furniture with this material. This requires the remains of wallpaper, varnish, glue, primer and putty. You can decorate almost any surface. It can be doors, walls, drawers and shelves. You can also cover cabinet furniture from the inside. This will give it a fresh and original look.

Decorated furniture fits perfectly in anyinterior. Original products look that harmonize with the color range of walls or curtains. If the furniture has turned out bright and original, then it can become a good accent among the interior items, executed in restrained tones. Wallpaper on the table, chest of drawers or at the head of the bed, in harmony with the color of the walls, allows you to create a single and complete composition.

Preparation of furniture

Before proceeding with decorating, furnitureshould be prepared. To begin with, it is necessary to remove the old coating, for example, varnish or exfoliated paint. This is done using sandpaper. Deep scratches, chips and cracks on the surface of furniture should not be left. They should be sealed with putty, designed to work with wood. After that, the treated areas should be sanded using sandpaper. This will allow the material to be fixed on the furniture surface.

In conclusion, the product should be completely coveredprimer. The furniture should dry well before gluing. It is not necessary to cover all surfaces with wallpaper. Perhaps, some part worth painting. You need to do this before working with the wallpaper.

How to paste?

In order to create from the remains of wallpapera masterpiece, it takes a little imagination and the ability to work with simple tools. First you should carefully measure the surface to be treated. The resulting values ​​must be transferred to the wallpaper and cut out a piece of the desired size.

It remains to paste the material on the surface of the furniture. To do this, you can use wallpaper glue or PVA. The first option is preferable. The adhesive glue allows you to slowly fix all the folds and creases. The material should be applied to the surface and well smoothened, expelling the air from the folds. This is not the end of the decorating process.

How to protect surfaces

Effectively will look wallpaper on the table or onchest of drawers. However, such surfaces quickly become dirty. It is for this reason that additional material processing is required. If paper used for pasting is made of paper, then it is necessary to cover them with a protective film first, which can be used as glue residues or a primer made on the basis of PVA. Apply the composition to the already dried material with a thin layer.

The treated surfaces should be varnished,preferably water-based. Do this after completely drying the protective layer. To begin with, it is recommended to check the effect of the varnish on a small piece of wallpaper. If the material is not deformed, the composition can be applied to the decorated surfaces. When choosing wallpaper, it should be noted that after coating with the lacquer material becomes darker by several tones.

If, for the decor of furniture, wallpaper made of vinyl is used, then one can not worry. Such material is easily cleaned. You can also use self-adhesive wallpaper for work.

Unusual blinds

There are more original ideas. From the wallpaper you can make beautiful and bright curtains. Very unusual look blinds on paper basis. They can be hung on any window. In addition, such curtains of wallpaper look stylish and no worse than foil shielded from the sun. Ready-made structures are quite light and virtually indistinguishable from fabric products.

For the manufacture of curtains from wallpapera little time and a minimum of costs. When choosing a material, you should pay special attention to the density: the denser, the better. In this case, non-woven fabrics are ideal. As for the color range, then you should choose light wallpaper with a small pattern. The material should not be too colorful.

How to make curtains

As already mentioned, from the remains of wallpaperYou can make original blinds with your hands. To begin with, it is necessary to cut out the canvas, which will correspond to the width of the window pane. The length of wallpaper should be more by 25%. From the resulting piece should be made accordion. In this case, the size of the folds should be from 2.5 to 5 centimeters. Of particular importance is the direction. The upper fold should be pointing upwards, and the bottom - down.

After the manufacture of the accordion it is necessary to determinemiddle of the product and make a hole. For this you can use an awl, punch, thin drill. In the resulting hole should be stretched cord. Finished curtains must be straightened. The cord, stretched through the entire curtain, is worth fixing, tying a knot on it. Curtains from the wallpaper are almost ready.

On the upper fold should be glued two-sidedScotch. This is necessary to fix the finished product to the window frame. Lower folds, about five pieces, should be glued in the middle, and then fixed with adhesive tape. The result should be something like a peacock's tail. Finally, you need to put a latch on the cord, thanks to which you can lift, and then lower the blind.

Decorated lamps

What can be done from the remains of wallpaper? A good option may be the original lamp. For manufacturing, you will need a frame from the lampshade and a number of wallpapers. From the material should be cut out a piece so that from the bottom and from above there was a stock of about 2 centimeters. Wallpaper must be gently applied to the frame with a wallpaper paste. The remaining stock should be incised in several places, and then glued inside the structure so that wrinkles do not appear. The result is an updated floor lamp with an unusual design.

The finished product can be decorated if desired. For this purpose ribbons and braid are ideal. The lamp leg can also be decorated. In this case, it all depends on your imagination.

Pots for plants

Crafts from the remains of wallpaper can be not onlyoriginal, but also useful. Flower pots are usually made of clay or plastic. Their design is often boring and insignificant. Beautiful containers for plants are worth a lot of money. However, if desired, you can decorate them yourself. Such products can decorate the house or serve as a good souvenir.

To work with flower pots is betteruse small pieces of wallpaper. The material for decor is better to choose thin. It will be easier to lie down, and wrinkles and wrinkles will not form on the surface. When the pot is completely pasted, it is necessary to leave it for a while to dry. Do not forget about the protection. On top of the wallpaper is to put a layer of glue. When the composition dries, an unusual flower pot should be varnished.

Other products

To decorate the interior you can make a flowerfrom wallpaper or whole bouquets. This innovation will introduce new notes into the design of the room. In addition, paper flowers do not fade. To decorate the walls you can use pictures from the wallpaper. The process of making them is very simple.

If you use a photo frame, you cancreate a kind of collage that will allow you to place accents. However, you should choose the right products. The frames should have different sizes, but their design should be identical. It remains only to cut out pieces of wallpaper and insert them into the products. That's all. The original decoration for the wall is ready.

Original picture

If you want from the remains of wallpaper can be madepanel. A three-dimensional product requires the presence of cardboard, plywood or chipboard. Prepared panel for the beginning should be covered with a primer, and then pasted with wallpaper. The edges of the material need to be wrapped on the back of the product. Do not forget about the suspension. It is mounted on the back of the panel.

In this case, the pictures look beautiful, whenthe manufacture of which used wallpaper with a fairly large pattern. The panel can be made one or modular. It all depends on your preferences and desires. Effectively will look exactly monochrome drawings.

In conclusion

Now you know what can be done from the remnantswallpaper. If desired, the material can be used to decorate flower pots or lamps, to restore old furniture, as well as to create an original panel. This requires a little time and effort. The result is a product that has an original and pleasant design. If desired, the old wallpaper can be used for decorating walls and ceilings. You can paste large canvases and highlight areas in the room, and you can cut out pieces of paper and paste them on monochrome surfaces of large sizes.

</ p>>