Liquid nails "Moment Editing": advantages and features of application

If you want to fix a partinterior and at the same time do not use screws, hammer and drill, then you can apply liquid nails "Moment Editing". The product has many advantages: excellent fixation, which provides high-quality adhesion of the composition to the surface, versatility, resistance to moisture, so it will work perfectly even in the bathroom. In addition, the adhesive is flexible and can hold together most building materials.

Liquid nails "Moment Editing" can beThey are used for internal and external works, since they have resistance to atmospheric influences. In addition, it can be used in a wide temperature range from -40 to +80 degrees. The substance has no odor, although it may have a different shade depending on the species.

Liquid nails "Moment Installation Super-strong"has a higher quality. Its only difference from other types of means is a beige shade. It can be used for gluing decorative elements on any surface inside the house and from the outside. And still the substance is able to fix the door frame in the opening, sills, plinths, platbands, ceramic plates, wood and other materials. In this case, the elements can be large.

Liquid nails "Moment Editing" are very simple inapplication. However, there are several nuances that are useful for knowing the user. First of all, to apply the composition to the surface, you should use a special gun, without which no one can squeeze out the adhesive from the tube. The cost of the mechanism is low, especially since it can be purchased at any construction shop. It is very easy to install a cylinder in such a gun.

Liquid nails "Moment Editing" easily open.To do this, cut the plastic sealing on the lid and unscrew it. If you purchased the product in a metal can, then the protection will have to be punctured additionally with a nail. Apply the substance on a clean and dry surface. In order for the element to adhere well, it is necessary to treat the substrate with a primer. After complete drying of the surfaces on one of them it is necessary to apply glue. If the product is small, it is better to squeeze a solid line of substance onto it. Otherwise, you can apply the dot method of application.

After the glue "Liquid Nails Moment Editing"is already on the product, it should be leaned against the base base and held for about 5 minutes. In this case, the element can be easily taped with a fist. This way you will provide a more secure mount.

If the product has fallen into the finish or the finish itselfglued product, do not remove it until it dries, otherwise you will simply smear the composition over the surface and make it dirty. Dry matter should be very carefully and accurately cut off with a sharp knife or blade moistened with water. That's all the features of the presented liquid nails. Good luck!

</ p>>