The homestead will not have a neat appearance,if bushes grew in its garden and park zone and the grass formed a dense cover. This indicates the neglect of the site by the owner, who does not do anything even to mow lawns. But grass mowing is the easiest activity on the site, because different techniques have been created for this work.
Advantage of the petrol trimmer
For example, a trimmer is very convenient andproductive, light, reliable and practical in use. It can be electric, having a low weight, or gasoline with high performance. Gasoline is more common, since they have a fuel tank and can work remotely from electrical communications. Perhaps the only disadvantage of the gasoline trimmer is that it, like any other equipment, periodically breaks down. But in this matter it has an advantage, as for people who understand a little in technology, it is possible to repair trim tabs of gasoline with their own hands.
Search for breakage
If the trimmer does not start, it's not worth itimmediately sound an alarm and contact the service center, as the cause of the inoperability can be easily removable. Any repair of gasoline trim tabs begins by checking the presence of a spark, without which it is impossible to ignite the fuel in the combustion chamber. If there is no spark, then the problem is either in the spark plug or in the ignition itself. Exception in those cases when the candle is flooded with a fuel mixture at a fuel overflow above the required level. In this case, you just need to wipe it dry and the cherished spark will appear.
The spark plug will also indicate the absencefuel receipts. If it is dry and light brown in this case, repairing the gas trimmer by yourself will consist in debugging fuel pumping or cleaning the carburetor. All these reasons are easily eliminated, the main thing is that the engine itself works properly. But if the cause of the inoperability still disappears in the engine itself, then it is recommended to contact the service center due to the complexity of the repair. But for people who know how to hold wrenches and a screwdriver in their hands, nothing is impossible. In most cases, the repair of the trimmer motor ends successfully.
Briefly about engine repair
Problems in the engine begin after a fewyears of correct operation from wear of accessories or suddenly if the trimmer is incorrectly used. Unfortunately, it is a pity to misuse it when repairing petrol trim tabs with your own hands after engine failure. And this happens in those cases when the dosage of oil in the fuel is not observed or the device works up to a terrible overheating. In case of overheating, it is possible to jam the crankshaft, destroy the piston rings or completely burn out the piston ring. In order to perform a revision of the piston, it is enough to remove the cylinder head from beneath which the piston, which clearly reflects the state of its working surface, appears. The rings themselves do not look out of the cylinder, so it does not matter - to change the rings or the piston, in both cases it is necessary to remove the cylinder. Carrying out repair of gasoline trim tabs with their own hands, it is worth remembering the fragility of piston rings, which can easily break in the absence of experience. The piston itself is not too difficult to install on the crankshaft. The main thing when repairing an engine is to collect everything just as it was before the disassembly, and then everything will work again.</ p>>
