Electromechanical lock on wicket: selection and installation

Electromechanical lock on the gate was formodern man is a very useful invention, because now you do not need to run to the street to open someone's entrance. It's enough just to make sure on the intercom that the welcome guest has arrived and press the corresponding button. Making the right choice of a suitable model for yourself is often not a simple task, because each species has its own purpose and design.

What to look for when choosing

Here, first of all, it is necessary to drawattention to the fact that there are external and internal devices. In connection with the fact that it is necessary to select an electromechanical lock on the gate, the second variety disappears by itself. In addition, the modifications of the device differ by the supported voltage, the way of control and installation and, of course, the type of doors to which they are mounted. Going to the store, you should know all these parameters. It should be noted that there managers can offer some other varieties - an electromagnetic lock or an electric strike. They also have their own merits, however, as practice shows, the best option is usually electromechanical locks for a street gate.

In comparison with other varieties, these modelsmore expensive. This can be explained by their practicality, reliability and durability. At purchase it is recommended to give preference to those variants which can be opened also by means of keys, after all cases happen different. It is desirable that the manufacturer is a well-known company. A vivid example of such products is the electromechanical lock on the gate "Cisa". As for the shortcomings, here it can be noted except that the need to pull a special cable, which does not have a very good effect on the aesthetic appearance.

Equipment

The standard equipment includesintercom, power supply, lock itself, call panel, patch panel, keys, power supply box and wires. Having all this in stock, you can install an electromechanical lock on the gate yourself. The main thing is to follow the procedure prescribed in the instructions. You can open the lock in several ways. This is done by sending an electrical signal through a doorphone, using a special button on its case (in cases with overlaid models), and also due to a mechanical lock.

Setting the device

It is recommended that the gateIt is required to install the device, it corresponds to its level. In the case when the lock is invoiced, it is recommended that at least in one place the profile be connected with the slave in the form of the letter "T". This will ensure a reliable attachment to the three screws. The response part of the mechanism itself is mounted on the opposite side, on the porch. After that, you can start laying the connecting cable. First it should be taken to the "guard", and then held in a junction box. This can be done in various ways. Everything depends on the physical characteristics and type of wicket. Next, the wire must be connected to the reader and the output unit. After that, the cable can be hidden in a PVC pipe, and the electromechanical lock on the gate is ready for operation.

</ p>>