/ / How to tie a tie, or the art of real men

How to tie a tie, or the art of real men

Male tie - a very important part of the wardrobe,which must necessarily be present in several copies. Ideally, if they are suitable for a variety of costumes, they can be worn for different reasons and in different situations. Do you know how to choose the right thing, do you know how to choose a tie to suit and correctly tie it up? The answers to these questions should be given in time to make a real, stylish wardrobe of a modern business person.

If you have no idea how to tietie, ask for help from those who can show it by examples. If this is not possible, you can follow several tips. To tie a "small" knot called the "Small Knot", you need to unscrew the wide part of the tie with a seam outward, then cross the two ends so that the narrowest part is on top. Next, it is necessary to draw a wide end over the narrow end, to lead him by the knot and, finally, to pass into the loop between the tie and collar. The last action is the forward pull of the wide end of the tie, pulling it under the top layer of the knot and finally tightening the knot. It is important to check whether the ends of the tie match, and whether it lies well under the collar.

Before tie a tie with any knot,It is worthwhile to practice some time in front of the mirror, since without practice, skill does not come. To tie the knot "Quartet", which is considered the most simple and spectacular, you should put the necktie around your neck, lowering the wide end below the narrow one by 30 cm, cross the both ends and wind the wide part behind the narrow one. Next, you need to hold a wide end before the narrow end, pass it from the bottom up, passing through the loop between the tie and collar. After that, it remains only to hold the wide part of the tie in a loop from top to bottom, holding the knot to prevent it from being tightened.

The Windsor node is not as simple as the twoabove, it is a triangular knot, wide, necessary for official situations. To do this, you should put on a tie, lowering the wide end 30 cm below the narrow one, cross them, pass the wide part into the neck loop, thus formed, stretch to the left side behind the knot and pass into the loop from top to bottom. After that, you need to point the wide end of the tie over the narrow part to the right, raise it and put it into the loop for the third time. Next, the tie should be pulled at the wide end, tightening the knot, and pull it to the collar.

However, to begin with it is necessary to be defined not with that,how to tie a tie properly, but with how many of these things you might need. Firstly, it is monophonic, suitable equally for all costumes. It is best if it is red - the color of success, prosperity and power, refreshing and harmoniously combined with other shades.

Before you tie a tie, think aboutWhat you need it for. For responsible business negotiations in the wardrobe there must be an object with a repeating pattern - a strip or polka dots. Striped thing is an expression of business acumen and serious intentions, suitable to the traditional color scheme of the rest of the clothes (costume and shirt). A tie with a polka-dot pattern is well suited for official events, especially if the pattern is more like a dot.

With regard to the technique of tying a tie, thenyou should immediately determine the type of node, each of which depends on the chosen collar. If the collar is cut, it is worth giving preference to the node "Windsor", a bulky, well-looking on its widely spaced corners. The other forms of collars can be combined with any type of knot, if you know how to tie a tie properly and know how to do it. The main knot - the standard one - is slightly stretched in shape, which makes it possible to visually extend a part of the neck over the collar. Such a wardrobe will create an attractive effect of light asymmetry and originality. As for the size of the node, this point is always dictated by fashion. This year is the year of major knots, with a clearly expressed form, very stylish and modern.

</ p>>
Read more: