What you need to know about the dismantling of air conditioners
It is not uncommon to dismantle air conditioners ifmoving to a new location. This can be a change of residence, and a change of workplace or office. In such cases, remove the external and internal sides of the air conditioner should professionals who have similar experience. Often these are the same people who are engaged in the installation of cooling systems.
It is important that during the dismantling the equipment is preservedin the best way, without losing its technical and aesthetic qualities. Therefore, it is necessary to remove the air conditioner with extreme caution and care, knowing its device and method of operation.
The dismantling of air conditioners begins with the fact thatunscrew the nozzles that are on the main cranes of the system. As a rule, they are located at the intersection of copper pipes, in which the refrigerant is located. If this procedure is performed carelessly, the refrigerant can easily leave its location and be outside, which will lead not only to the breakdown of the air conditioner itself, but also to other undesirable consequences.
When working with cooling equipment, it is important to have allnecessary tools that will help to remove both the indoor unit (a task that does not have a high level of complexity) and external (which is not always easy, especially if the air conditioner is fixed on the upper floors).
When the installation and dismantling of air conditioners is carried out,in any case, inert gases enter the atmosphere. If the replacement of blocks is done by professionals, then such oxidation occurs in a very small percentage, but if you unscrew the fittings yourself, Freon and other fillers that are responsible for cooling the air in the room will come out in much larger quantities. As a result, not only the environment will be harmed, but also the purse of the owner of the air conditioner, since during installation in a new place it will be necessary to fill the system with new fillers.
Dismantling of air conditioners requires preliminaryturn on this unit. This is necessary to ensure that freon during the operation of the system is completely transferred to an external unit. Before shutting down, also turn on the tap that is on the external unit. He is responsible for the release of freon into the indoor unit of the air conditioner. This procedure lasts only a few minutes, but if neglected, dismantling the air conditioners will be a dangerous operation.
Do not forget about the pipes of the indoor unitair conditioner - they must be completely closed. In this position, the pipes must be located when the air conditioners are installed and dismantled, and they are activated only after the completion of all work. However, this is not a complete list of rules and nuances that should be taken into account when working.
If the dismantling of air conditioners is done by professionals, then there is nothing to worry about - the equipment will remain unharmed.
Cost of work on removing air conditioner unitsis quite low, so do not save on it. Otherwise, acting alone, you can easily break down the air conditioner, and buying a new one will already result in a "pretty penny," which is unlikely to be a good start to moving to a new location.
</ p>>
