Differential automaton: value, selection rules, connection
A powerful protective force against attackelectric current on the human body is a differential automaton. It combines the functions of an automatic interrupter and a residual current device (RCD). The action of this machine is aimed at protecting the wiring from overload, short circuits, as well as protecting a person from electricity when they get into the high voltage area and touching current-carrying elements of equipment.
How to choose the required differential automaton
At present, preference is given to datadevices with a high tripping capacity (3000 A for terminal devices, 6000 A for group devices) and with protection against damage to the neutral conductor. If there are several lines of electricity consumption in the room, it is better to connect the differential automaton separately to each of them. Preliminary it is necessary to find out the internal voltage of the network, calculate the total power of household and lighting devices that will be connected to this line, and then buy the specified device.
The main moments of automaton selection
- Basic (nominal) voltage of the deviceshould correspond to the indicator for which the network is designed. This is an important condition. For a single-phase network, this is not less than 230 V, and in the case of a three-phase network it is within 400 V.
- The maximum permissible (nominal)the current of the differential automaton should not be greater than that of the corresponding electrical circuit. This will avoid overloading the network, overheating the conductive and insulating parts.
Procedure for self-disconnection of the specified device
- Inspect the machine and determine the cause of the trip (network overload, short circuit, current leakage).
- Press the reset button after removing the cause of the protective shutdown.
Principle of operation of the device
Let's consider in more detail how it worksThe differential automatic machine, which connection scheme is the same as in the RCD. The principle of the device is to compare the electrical currents passing through the phases "L" and "N" (zero).
A differential automaton must have a one-dimensionalbody (without dents, cracks and other defects), mandatory marking on it, corresponding to the necessary parameters, and the mechanism responsible for switching the device on and off should be in working order.</ p>>