Passport cover with your own hands. Scrapbooking: passport cover
For any person, the passport is the maina document confirming his identity. That this thing always looked neat, it needs to be issued in the cover. Today you can buy a cover for a document of factory production. But if you are a creative person, if you want your passport to look not only neat, but also original, we suggest you "dress it up" in a handmade cover. Modern masters invented and tested many ways to perform such products. Some of them we will consider in this article. Your attention here are the master classes, following which you can find out how the cover is made for the passport from felt, as well as in the techniques of scrapbooking and decoupage. We study the information.
Make a cover for the document of felt fabric. Preparation of materials
This type of textile produces soft andpleasant to touch the product. In work this fabric is very pliable. To carry out the cover on a passport, manual work of felt will take no more than two hours. For the creative process we prepare such materials:
- felt of different colors;
- paper;
- scissors;
- pencil;
- multicolored thread for embroidery;
- ruler.
The instruction on manufacturing of a cover
If you are interested in information about how tomake a passport cover with your own hands from felt, study the following description. Measure the passport in the expanded form. On the table spread a sheet of felt that color, in which you want to make a cover. On it, place labels equal to the width and length of the passport and plus from each side of 0.5 centimeters for allowances for seams. Cut out this workpiece.
Further from the same tissue (and perhaps from matteranother color), follow the details of the inner side of the cover. Its length should be equal to the length of the pattern of the main part, and the width of not less than 5-6 centimeters. If done already, the sheets of the passport will slip out of the cover. Now we apply one internal detail to the main one and connect them with a suture seam with threads of a mulina. Similarly, we design the other side of the product. If desired, this seam can perform all the edges of the craft, it will look beautiful and interesting. The basis of such an item, as a cover for a passport, has been executed by oneself. Let's start decorating.
The "highlight" of this product will be beautifulApplique on the front side. To do this, we sketch a sketch of the desired picture. Then cut out the template and transfer it to felt. We prepare blanks for application. Sew them on the front side of the sleeve with embroidery threads. That's all, "clothes" for your main document is made. As for applications, they can be very diverse. For inspiration, you can see photos of similar products in this article.
Registration of covers in the technique of scrapbooking. What do you need for this kind of creativity?
Not only original, but also very fashionable todayhave things handmade, made exactly in this technique. The cover for the passport is not an exception. Scrapbooking is a technique in which we will now learn how to work. We prepare the materials listed in the list for work:
- transparent cover for the passport of factory production;
- special paper for scrapbooking of two kinds;
- scissors;
- PVA glue;
- pencil;
- ruler;
- decorative punch;
- Double-sided tape;
- artificial flat flowers;
- tape;
- printout of the word "passport".
How the cover is made for a passport (scrapbooking): instruction
Cut out a piece of paper in a rectangular shape,corresponding to the size of the transparent cover. The edges of the workpiece are rounded off. A scrapbook of another color cuts a rectangular piece. Its dimensions should be about twice as large as the printed "passport" inscription. The edges of this blank are processed with a decorative punch. We paste on it a piece of paper with an inscription on the center. On the front side of the main paper part, we glue a decorative element with the name of the document.
In the lower right corner (or whatever you wantplace) we attach flat flowers. Using double-sided adhesive tape, attach the cover of paper to the plastic transparent. We paste the document inside. Everything, the handy is ready to surprise everyone with its beauty and uniqueness.
Registration of covers for a passport in the style of decoupage. Stage of preparation
Speaking of such a direction in needlework, howmanufacturing of covers for the passport, it is impossible not to recall this technology of design of products. Today it is one of the most popular and fashionable. If you want to master this craft, we invite you to the next master class. But first we will prepare everything necessary for the work, namely:
- plastic cover for passport;
- napkins for decoupage with the desired pattern;
- sandpaper (null);
- acetone;
- acrylic paint of white color;
- brushes;
- acrylic lacquer.
Description of the process of manufacturing a cover for documents in decoupage technique
For work we assume with confidence that the cover on the passport, made by ourselves, will turn out at us not just beautiful, but remarkable. Let's get down to creativity.
The plastic surface of the cover is slightly cleanedsandpaper to make it rough. Next, wipe it with acetone, that is degrease. The next step is applying white acrylic paint. We paint the entire surface and leave the product to dry. Then we apply another coat of paint. We try to distribute it evenly. When the cover on the passport, prepared for decoupage with your own hands, will be completely dry, then you can begin to decorate it.
When the entire surface of the product is framed,Lubricate it with a layer of varnish on top. Leave the cover dry. If the edges of the napkin go beyond the cover, we sand it. The ends of the craft are painted with acrylic paint, matched to the napkins. Finally, cover the cover with another layer of varnish. The product is ready, the master class "Cover on the passport in the technique of decoupage" is over. Pleasant creativity!
</ p>>
